LiveZilla Live Chat Software
New Product
Cleveland TFI 2135 Satin Rho Golf Putter
Full Details

Cleveland TFI 2135 Satin Rho Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

Rho focuses on ultimate ease of alignment and stability in a high performance modern mallet shape. Two wings are placed at the rear perimeters of the design to promote much greater consistency on off centre hits, as well as a contrasting black centre piece in the same width as the radius of a golf ball so you can set up perfectly everytime.
£129.00 was £149.99Save £20.99
New Product
Cleveland TFI 2135 Satin 8.0 CB Golf Putter
Full Details

Cleveland TFI 2135 Satin 8.0 CB Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

8.0 is a modern blade shape designed for the players who demand the classic look of a blade with the stability and forgiveness characteristics of a mallet. Suiting the slight arc putting stroke, the back features a focus inspiring contrast between the satin perimeters and black centre while a single white sightline makes for a simple yet effective aesthetic at address. With the addition of a counter-balance in the grip, the stroke is also much improved by distriuting weight throughout the putter more effectively for outstanding consistecy on the greens.
£129.00 was £149.99Save £20.99
New Product
Cleveland TFI 2135 Satin Elevado Golf Putter
Full Details

Cleveland TFI 2135 Satin Elevado Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

Elevado priorites stability in a high performance mallet shape. Two wings are placed at the rear perimeters of the design to promote much greater consistency on off centre hits, as well as improving alignment by framing the ball perfectly.
£129.00 was £149.99Save £20.99
New Product
Cleveland TFI 2135 Satin Cero Golf Putter
Full Details

Cleveland TFI 2135 Satin Cero Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

Cero is a classic rounded mallet design that simply inspires confidence from the first putt. The perimeters feature the premium satin finish while a black centre piece with contrasting white sightline help players focus on the ball for much improved striking and overall consistency.
£129.00 was £149.99Save £20.99
New Product
Cleveland TFI 2135 Satin Elevado CB Golf Putter
Full Details

Cleveland TFI 2135 Satin Elevado CB Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

Elevado CB priorites stability in a high performance mallet shape. Two wings are placed at the rear perimeters of the design to promote much greater consistency on off centre hits, as well as improving alignment by framing the ball perfectly. The overall stroke is also much improved by the addition of a counter-balance in the oversized grip to distribute weight throughout the putter much more effectively.
£129.00 was £149.99Save £20.99
New Product
Cleveland TFI 2135 Satin 1.0 Golf Putter
Full Details

Cleveland TFI 2135 Satin 1.0 Golf Putter

Perfect alignment for every golfer, every time - Cleveland's new TFI 2135 satin range of putters reinvents the way you look at a putter to give you ultimate confidence on the greens.

So how does this putter differ from conventional putters? The key is in the alignment aid. Traditionally, alignment aids are placed on the bottom flange of the putter and allow perfect set up provided your eyes are directly over the ball. However the problem identified by Cleveland experts afrom a series of rigorous studies into golfers of all abilities is that a mere 20% of all players set up to the ball with their eyes directly above this line. Therefore for the other 80%, the angle of looking down at the sightline from either inside or outside results in misalignment, meaning eachtime you set up to a putt you're destined to miss it. So how do Cleveland solve this issue? By raising the sightline to intercept the point where the 3 lines of vision cross - set up with the eyes from the inside, set up with the eyes directly over and set up with the eyes from the outside, the putter provides the same perfect alignment for all. At 21.35mm from the ground, the basis of the putters name, this alignment aid sets up to the exact centre point on the axis of a golf ball to not only give you the perfect set up, but also to ensure that you're striking the ball from the centre time after time for unparalleld consistency.

Adding to the TFI 2135's appeal is the newly developed 'Optimized Face Milling' process in which each model features a specific milling design for much greater forgiveness and consistency on mis-hits. Your putts therefore will travel at a much more similar speed when struck in a variety of places across the face to give you a helping hand on the greens should you not find the sweet spot.

1.0 is a classic blade design targeting the purest putters. Suiting the slight arc putting stroke, the back features a focus inspiring contrast between the satin perimeters and black centre while a single white sightline makes for a simple yet effective aesthetic at address.
£119.00 was £149.99Save £30.99
New Product
Cleveland Huntington Beach 1.0 Golf Putter
Full Details

Cleveland Huntington Beach 1.0 Golf Putter

Introducing Cleveland Golf's new Huntington Beach putter collection. Named after the beautiful location of their North American headquarters, these stunning putters feature a classic design that will appeal to the traditionalist combined with modern innovations that will improve the scoring of even the most accomplished golfer.

Cleveland have stuck with their three traditional Tour-Proven head shapes that have stood the test of time in both the bags of the Tour player and the amateur golfer alike. The #1 is a classic plumber's neck blade designed with subtle curvature that portrays the softness of the putter. This heel-toe weighted, 345g model features a sight line on the flange as an additional alignment aid.

Each one of the three models available features a high precision milled face with a coarse, diamond-shaped milling pattern four times deeper than previous-generations. It's the deeper milling pattern that softens the feel at impact while increasing friction for a truer, more consistent roll, resulting in more putts made time after time.

The softer feel of the Huntington Beach collection is a result of using a soft 304 stainless steel, rather than 17-4 stainless steel. Not only is it easier to bend allowing for customisation with an 8° range (± 4°) of lie angle bending, it delivers that soft feel and solid sound the better player demands from their putter.
£79.00 was £89.99Save £10.99
New Product
Cleveland Huntington Beach 3.0 Golf Putter
Full Details

Cleveland Huntington Beach 3.0 Golf Putter

Introducing Cleveland Golf's new Huntington Beach putter collection. Named after the beautiful location of their North American headquarters, these stunning putters feature a classic design that will appeal to the traditionalist combined with modern innovations that will improve the scoring of even the most accomplished golfer.

Cleveland have added to their traditional Tour-Proven head shapes that have stood the test of time in both the bags of the Tour player and the amateur golfer alike. The #3 is a classic slant neck blade designed for the slight arc putting stroke, providing a clean and simple aesthetic for the player. This heel-toe weighted, 345g model features a sight line on the flange as an additional alignment aid.

Each one of the three models available features a high precision milled face with a coarse, diamond-shaped milling pattern four times deeper than previous-generations. It's the deeper milling pattern that softens the feel at impact while increasing friction for a truer, more consistent roll, resulting in more putts made time after time.

The softer feel of the Huntington Beach collection is a result of using a soft 304 stainless steel, rather than 17-4 stainless steel. Not only is it easier to bend allowing for customisation with an 8° range (± 4°) of lie angle bending, it delivers that soft feel and solid sound the better player demands from their putter.
£79.00 was £89.99Save £10.99
New Product
Cleveland Huntington Beach 4.0 Golf Putter
Full Details

Cleveland Huntington Beach 4.0 Golf Putter

Introducing Cleveland Golf's new Huntington Beach putter collection. Named after the beautiful location of their North American headquarters, these stunning putters feature a classic design that will appeal to the traditionalist combined with modern innovations that will improve the scoring of even the most accomplished golfer.

Cleveland have stuck with their three traditional Tour-Proven head shapes that have stood the test of time in both the bags of the Tour player and the amateur golfer alike. The #4 is a plumber's neck blade design, this heel-toe weighted model features sharper, more aggressive angles for those who prefer a squarer look.

Each one of the three models available features a high precision milled face with a coarse, diamond-shaped milling pattern four times deeper than previous-generations. It's the deeper milling pattern that softens the feel at impact while increasing friction for a truer, more consistent roll, resulting in more putts made time after time.

The softer feel of the Huntington Beach collection is a result of using a soft 304 stainless steel, rather than 17-4 stainless steel. Not only is it easier to bend allowing for customisation with an 8° range (± 4°) of lie angle bending, it delivers that soft feel and solid sound the better player demands from their putter.
£79.00 was £89.99Save £10.99
New Product
Cleveland Huntington Beach 6.0 Golf Putter
Full Details

Cleveland Huntington Beach 6.0 Golf Putter

Introducing Cleveland Golf's new Huntington Beach putter collection. Named after the beautiful location of their North American headquarters, these stunning putters feature a classic design that will appeal to the traditionalist combined with modern innovations that will improve the scoring of even the most accomplished golfer.

Cleveland have stuck with their three traditional Tour-Proven head shapes that have stood the test of time in both the bags of the Tour player and the amateur golfer alike. The #6 is a classic mid-mallet shape with a double bend shaft. Each line flows from front to back to improve alignment and confidence.

Each one of the three models available features a high precision milled face with a coarse, diamond-shaped milling pattern four times deeper than previous-generations. It's the deeper milling pattern that softens the feel at impact while increasing friction for a truer, more consistent roll, resulting in more putts made time after time.

The softer feel of the Huntington Beach collection is a result of using a soft 304 stainless steel, rather than 17-4 stainless steel. Not only is it easier to bend allowing for customisation with an 8° range (± 4°) of lie angle bending, it delivers that soft feel and solid sound the better player demands from their putter.
£79.00 was £89.99Save £10.99
New Product
Cleveland Huntington Beach 6.0 CS Golf Putter
Full Details

Cleveland Huntington Beach 6.0 CS Golf Putter

Introducing Cleveland Golf's new Huntington Beach putter collection. Named after the beautiful location of their North American headquarters, these stunning putters feature a classic design that will appeal to the traditionalist combined with modern innovations that will improve the scoring of even the most accomplished golfer.

Cleveland have added to their traditional Tour-Proven head shapes that have stood the test of time in both the bags of the Tour player and the amateur golfer alike. The #6 Centre Shaft is a classic mid-mallet shape designed for ultimate putting stability. Each line flows from front to back to improve alignment and confidence.

Each one of the three models available features a high precision milled face with a coarse, diamond-shaped milling pattern four times deeper than previous-generations. It's the deeper milling pattern that softens the feel at impact while increasing friction for a truer, more consistent roll, resulting in more putts made time after time.

The softer feel of the Huntington Beach collection is a result of using a soft 304 stainless steel, rather than 17-4 stainless steel. Not only is it easier to bend allowing for customisation with an 8° range (± 4°) of lie angle bending, it delivers that soft feel and solid sound the better player demands from their putter.
£79.00 was £89.99Save £10.99