Motocaddy Trolley Accessory Station
Motocaddy Trolley Caddy Rack
Motocaddy S Series Trolley Seat
Motocaddy Trolley Device Cradle
Motocaddy Universal Drinks Holder
Motocaddy M Series Trolley Travel Cover
Motocaddy Rain Safe Cover
Motocaddy S Series Trolley Travel Cover
Motocaddy Trolley Scorecard Holder
Motocaddy Trolley Umbrella Holder
PowaKaddy Beverage Holder
PowaKaddy Universal Scorecard Holder
PowaKaddy Universal GPS/Smartphone Holder
PowaKaddy Universal Umbrella Holder
Stewart Golf F1 Travel Bag
Stewart Golf X Series Lithium Battery & Charger
The new Lithium Phosphate 20Ah battery has been developed as a true 12V battery, which means that it can be used in any X Series (X1, X3 or X5). There are no electronics changes or adjustments necessary; you can just start using the new battery as a direct replacement.
The battery is protected by a sophisticated battery management system (BMS) that constantly monitors every cell to ensure the battery is always optimised for best performance and life. It is supplied with complete with battery lead and protective neoprene case. It is also supplied with a specially developed battery charger which will help keep the battery in top condition.
You will note that the lithium battery is supplied with blue/black connectors, whereas your trolley may be fitted with red/black connectors. This change has been made to emphasise the importance of using the correct battery charger with this battery - using the wrong charger could damage the battery.
Stewart Golf 20Ah battery specification: Type: LiFePO4 ( Lithium Phosphate) Voltage: 12 Volts nominal Capacity: 20 Amp hour Size: 188mm x 160mm x 75mm (7.4” x 6.3” x 2.9”) Weight: 2.9Kg (5.7lb) Life: More than 1,000 cycles (see below) Warranty: 2 years Management: Internal integrated cell management system Connection: Output Torberry, separate charger socket Accessories: Quality fitted soft-touch protection bag Charger: Input 100/240V, 50/60 Hz Output 14.6V, 2 Amp Charger Time: 6 to 10 hours Size: 155mm x 70mm x 50mm ( 6.1” x 2.7” x 2.0”)
Stewart Golf X/F Series Alloy Wheel Set
The rear wheels have been designed with a thick tyre (approx 25mm) for quiet running on hard surfaces. The quick release mechanism has been cleverly redesigned to allow 'one handed' removal, with just one moving part. The front wheels are designed to match the rears, made from a soft material which slides laterally over the grass when you steer your X3R.
Are the wheels easy to fit?
Rear wheels can be fitted easily using the quick release mechanism. The front wheels require an Torx / Allen Key and a pair of circlip pliers, if you don't have these then please check the box for the fitting kit. The set of wheels is supplied with the new 4 way drives which we recommend are used, although this is not required for operation. The alloy wheels can not be fitted to the X1.
A competent engineer will be able to fit the front wheels and the 4 way drive. If you are not comfortable with this task then we are able to provide this service within the UK. There is a £50 fee to cover the cost of transportation back to the factory and then return shipping to you. Please select factory fitting in the options and we will contact you to make the arrangements (please make sure we have all your contact details in the additional info section when placing order).
Stewart Golf X/F Series Engraved Name Plaque
Stewart Golf X/F Series Hedgehog Winter Wheels
Stewart Golf have tested the new wheel set (developed in conjunction with Hedgehog) and the results are excellent. As well as reduced the reduced surface area in contact with the course, the wheels give a significant increase in traction which in turn improves steering and overall control.
Stewart Golf X/F Series Large Umbrella Holder
PLEASE NOTE: This umbrella holder is not designed to hold an umbrella while the cart is in motion, indeed for many users it will be too low to achieve this. It is designed as a place to put an umbrella while you take a shot. This is also a safety precaution designed to remove the chance of the trolley becoming unstable when used in windy conditions, as a remote control machine could be a distance away from the user when in motion.
We recommend using a rain cover to keep your bag & clubs dry, so you can keep an umbrella with you to keep yourself dry.
Stewart Golf X/F Spare Handset
If you are ordering a spare handset to go with a new order for an X7 or F1 electric golf trolley, please just enter 'NEW' in the additional info section when completing your order.
Delivery: Up to 14 working days.
Stewart Golf Z Series Large Adjustable Umbrella Holder
NOTE: This product is designed for the Z1/Z3 Push Trolley only and will not fit on the X Series or F1 Lithium.
'Pac Mac' Rain Cover
Ball Kaddie Golf Ball Dispenser
The Golfers Club Clear Bag Cape
Clear Bag Hood
The Golfers Club Trolley Webbing Straps
Nylon Bag Cape
Pac Hood - Universal Bag Hood
Clicgear Club Brush
Clicgear Cup Holder
The Cup Holder fits all Clicgear Models 1.0, 2.0, 3.0, 3.5 Plus and Rovic® Carts. It will also fit other brand name push carts with 1" tubing. This product is supplied with a Clicgear Accessory Tab mount for easy installation.
Clicgear Shoe Brush
Fits Clicgear Carts Model 1.0, Model 2.0 and Model 3.0.
Clicgear Trolley Wheel Covers
Get yours today from Snainton Golf